Integrated Manufacturing
Home / Integrated Manufacturing

An essential element of delivering exceptional outcomes for clients is the method of interaction between supplier and client. Fabrum has a wide engineering competency to build and manufacture components through to product assemblies to meet clients’ needs.

Integrated manufacturing is about modifying each part of the process to achieve tailored systems and facilities and to make better use of the whole package.

Fabrum has a clear focus on walking the client through the full manufacturing process to ensure critical timeframes and budgets are met and there are no surprises. Confidence for the client is assured through the client being kept abreast of every stage of the development process.

diagram-only

INTEGRATED MANUFACTURING CASE STUDIES

Tallahassee Magnet Insert


HTS - 110Fabrum provided expertise in the construction of a 20,000A Roebel cable magnet insert to test high-current carrying superconducting cable in a 20 Tesla field to determine properties for superfield magnet development at the National High Magnetic Field Laboratory in Tallahassee, U.S. The insert required high tolerance machining of copper and carbon composite materials as a single unit

1kW Cryocooler


HTS - 110Fabrum have worked alongside Callaghan Innovation as the industrialising partner to develop and build the 100 W, 330W and 1kW cryocooler specifically for industrial and research applications. The cooler uses a pulse wave generator that utilises a Long life metal diaphragm that keeps oil separate from a clean gas circuit. With no moving seals and the diaphragms acting as flexure bearings, ultimate reliability and long life is ensured. Opposing diaphragm gas spring balances average pressure and provides a convenient reservoir for pulse tubes.

The PWG is driven by a rugged industrial motor which is cost effective, robust and reliable The motor is tolerant of poor power quality, flexible for multiple voltages and simple to use. It is also long life, with 40,000 hrs between major overhauls. The PWG utilises a simple drive mechanism with a conventional lubricated drive mechanism operating at atmospheric pressure requiring no pressure control. It is easily accessible for preventative maintenance (oil changes) without disturbing the clean gas circuit. The cryo cooler cold head is a linear pulse tube, uses three units on the 1 Kw unit.

 

cryocooler-table

 

Magnetic Hammer-Drilling System


cuddonsThese systems are used in the energy exploration and construction industries, which use rapidly rotating magnets of alternating polarities.

Magnetic hammer-drilling systems were developed by FlexiDRILLTM, New Zealand, for exclusive distribution by VermeerTM.

Fabrum Solutions manufactures and assembles this unit for supply as a finished system to VermeerTM, as it requires procurement and specialist machining of rare materials, including handling and placement of rare earth magnets.

Medical Measurement Devices


Mercer StainlessqNano, created for IzonTM, has a unique nanopore-based detection to enable the physical properties of a wide-range of particle types to be accurately measured. The product provides a minutely adjustable and thermally stable system for delivering air pressure to the nano particle detection device.
Fabrum Solutions assisted with the development and “design for manufacture” of the air pressure device and base, and manufactures these components.

Vestibulum pharetra nibh sit amet consequat commodo. Ut viverra est non est venenatis, quis faucibus nulla rutrum.

Name

Organisation

Vestibulum pharetra nibh sit amet consequat commodo. Ut viverra est non est venenatis, quis faucibus nulla rutrum.

Name

Organisation

Vestibulum pharetra nibh sit amet consequat commodo. Ut viverra est non est venenatis, quis faucibus nulla rutrum.

Name

Organisation

Vestibulum pharetra nibh sit amet consequat commodo. Ut viverra est non est venenatis, quis faucibus nulla rutrum.

Name

Organisation

 Vestibulum pharetra nibh sit amet consequat commodo. Ut viverra est non est venenatis, quis faucibus nulla rutrum.

Name

Organisation

New Zealand

sales@fabrumsolutions.com

128a Waterloo Road, Hornby

Christchurch 8042

+64 3 982 2810 or 0508FABRUM

U.s.

John@fabrumsolutions.com

PO Box 2263, Malta, New York 12020

Europe

sales@fabrumsolutions.com

2 Rue des Murailles 38170
Seyssinet-Pariset, France



Contact Us

Get in touch. You can send us an email and we'll get back to you, asap.

X